STALEKS EXPERT
Diamond nail drill bit flame red, head diameter 2,3 mm, working part 10 mm

• Diamond nozzle for hardware manicure/pedicure.
• Red notch with soft abrasiveness is for delicate processing of skin, suitable for work by beginners and experienced technicians.
• "Flame" shape is for processing cuticles, lateral nail folds, and filing out detachments without the risk of injuring the skin.
• The sinuses are processed with a "nose," the cuticle is cleaned with a flat part, and the lateral nail folds are processed with a "belly." Work with this drill bit at an angle of 45 degrees.

In manicure:

• Lifting and removing cuticles.
• Processing of lateral nail folds.
• Removal of the pterygium.
• Opening of the sinuses.
• Nail modeling.
• Processing of periungual sinuses.
• The shaping of a plate of classical shape.
• Drilling seats for rhinestones.

In pedicure/podology:

• Processing of corn.
• Removal of cracks.
• High-quality diamond coating.
• Can be subject to all types of sterilization and disinfection.
• Resistant to corrosion.

Series	Expert
Use	Professional use
Purpose	For cuticles
Type	Diamond nail drill bit
Material	Stainless steel, nickel, diamond abrasive.
Working Part Shape	Flame
Grit Value	Red / soft
Disinfection and Sterilization	Suitable for all types of disinfection and sterilisation, with strict adherence to manufacturer's instructions and recommendations, and when using certified products.
Warranty	2 years
Working Part Size, mm	10

Install the nail drill bit into the manicure device according to the device instructions; use it (if necessary) to remove artificial coating from the nail plate, shape and correct artificial nails, remove excess material and prepare natural nails for reapplication of coating, as well as to polish rough skin around the nail plate; then remove the drill bit from the device.

Store in a dry, well-ventilated place, out of reach of children, at a distance of at least 1 m from heating devices, at a temperature not lower than +0°C and not higher than +40°C and relative humidity up to 80%. Use as intended; after use, keep in a clean and dry condition. Do not use acids or alkalis for disinfection and sterilization. Do not use abrasive or metal objects for cleaning. Avoid dropping on hard surfaces and contact with corrosive-active substances. Resistant to all types of disinfection and sterilization without loss of quality.

Manufacturer: Staleks sp. z o.o., 39a Domaniewska St., Warsaw, 02-672, Poland (info.eu@staleks.com).