Diamond nail drill bit ball red EXPERT head diameter 4 mm

• Diamond nozzle for hardware manicure/pedicure.
• Red notch with soft abrasiveness 180 grit suitable for working with skin or natural nails.
  
• The shape of the "Ball" of small diameter effectively cleans the pterygium, and the medium diameter - removes the cuticle.

In manicure:

• Lifting and removing cuticles.
• Processing of lateral nail folds and hangnails.
• Nail modeling, including nail plate piercing.
• Formation of a plate of classical shape.

In pedicure/podology:

• Treatment of cracks, calluses.
• Treatment of keratinized skin areas.
• Treatment of corn.
• Treatment of rough skin folds between the fingers.
• High-quality diamond coating.
• Can be subject to all types of sterilization and disinfection.
• Resistant to corrosion.

Series	Expert
Use	Professional use
Purpose	For cuticles
Type	Diamond nail drill bit
Material	Stainless steel, nickel, diamond abrasive.
Working Part Shape	Ball
Grit Value	Red / soft
Disinfection and Sterilization	Suitable for all types of disinfection and sterilisation, with strict adherence to manufacturer's instructions and recommendations, and when using certified products.
Warranty	2 years
Working Part Size, mm	4

Install the nail drill bit into the manicure device according to the device instructions; use it (if necessary) to remove artificial coating from the nail plate, shape and correct artificial nails, remove excess material and prepare natural nails for reapplication of coating, as well as to polish rough skin around the nail plate; then remove the drill bit from the device.

Store in a dry, well-ventilated place, out of reach of children, at a distance of at least 1 m from heating devices, at a temperature not lower than +0°C and not higher than +40°C and relative humidity up to 80%. Use as intended; after use, keep in a clean and dry condition. Do not use acids or alkalis for disinfection and sterilization. Do not use abrasive or metal objects for cleaning. Avoid dropping on hard surfaces and contact with corrosive-active substances. Resistant to all types of disinfection and sterilization without loss of quality.

Manufacturer: Staleks sp. z o.o.,
39a Domaniewska St., Warsaw, 02-672, Poland
(info.eu@staleks.com).