STALEKS EXPERT
Carbide nail drill bit pine cone black hard, head diameter 6 mm, working part 14 mm

• Carbide nozzle for hardware manicure/pedicure.
• Black notch of coarse hardness.
• Shape "pine cone" for the correction of artificial nails, removal of gel polish and hard coatings.
• It is essential to comply with the recommended RPM requirements; the use at higher RPMs may result in injury to the client.

In manicure:

• Correction of extended nails.
• Preparation for the extension of artificial nails.
• Correction of the nail plate.
• Neatly cuts the material and leaves a flat surface.
• In the process of work, the material removes in the form of tiny chips, not as dust.

In pedicure/podology:

• Processing of keratinized skin areas.
• Processing of corns and calluses.
• High-quality metal.
• Can be subject to all types of sterilization and disinfection.
• Corrosion resistant.

Series	Expert
Use	Professional use
Purpose	For removing artificial material
Type	Carbide nail drill bit
Material	Stainless steel, nickel, diamond abrasive.
Working Part Shape	Pinecone
Grit Value	Black / coarse
Disinfection and Sterilization	Suitable for all types of disinfection and sterilisation, with strict adherence to manufacturer's instructions and recommendations, and when using certified products.
Warranty	2 years
Working Part Size, mm	14

Install the nail drill bit into the manicure device according to the device instructions; use it (if necessary) to remove artificial coating from the nail plate, shape and correct artificial nails, remove excess material and prepare natural nails for reapplication of coating, as well as to polish rough skin around the nail plate; then remove the drill bit from the device.

Store in a dry, ventilated place, out of children's reach, at a distance of at least 1 m from heating devices, at a temperature not lower than +0°C and not higher than +40°C, and relative humidity 80%. Use as intended; after use, keep it in a clean and dry state. Do not use acids and alkalis for disinfection and sterilization. It is forbidden to use abrasive and metal objects for cleaning. Avoid dropping on a hard surface and contact with corrosive-active impurities. Resistant to all types of disinfection and sterilization without loss of quality.

Manufacturer: Staleks sp. z o.o., 39a Domaniewska St., Warsaw, 02-672, Poland (info.eu@staleks.com).