STALEKS EXPERT
Carbide nail drill bit frustum red, head diameter 4 mm, working part 13 mm

• Fine crosscut.
• High-quality materials.
• High strength and resistance to external influences.
• Do not heat up during operation.
• The center of rotation does not shift at high speeds.
• Withstands all types of sterilization and disinfection.

Series	Expert
Use	Professional use
Purpose	For removing artificial material
Type	Carbide nail drill bit
Material	Stainless steel, nickel, diamond abrasive.
Working Part Shape	Frustum
Grit Value	Red / soft
Disinfection and Sterilization	Suitable for all types of disinfection and sterilisation, with strict adherence to manufacturer's instructions and recommendations, and when using certified products.
Warranty	2 years
Working Part Size, mm	13

Install the nail drill bit into the manicure device according to the device instructions; use it (if necessary) to remove artificial coating from the nail plate, shape and correct artificial nails, remove excess material and prepare natural nails for reapplication of coating, as well as to polish rough skin around the nail plate; then remove the drill bit from the device.

Store in a dry, ventilated place, out of children's reach, at a distance of at least 1 m from heating devices, at a temperature not lower than +0°C and not higher than +40°C, and relative humidity 80%. Use as intended; after use, keep it in a clean and dry state. Do not use acids and alkalis for disinfection and sterilization. It is forbidden to use abrasive and metal objects for cleaning. Avoid dropping on a hard surface and contact with corrosive-active impurities. Resistant to all types of disinfection and sterilization without loss of quality.

Manufacturer: Staleks sp. z o.o., 39a Domaniewska St., Warsaw, 02-672, Poland (info.eu@staleks.com).